TollMate -Toll Pass Holder

This electronic transponder pass holder is designed to keep it IN PLACE - behind the rearview mirror without the need for suction cups or sticky stuff on your windshield. Compatible with most state's toll transponders. It's a great place for iPods as well.

Shown in Almond with black acrylic binding and strap.

SIZE: 4 IN. TALL X 6 IN. LONG.

Patent Pending

Mounting Bracket Kit

If your structure prevents the threading of the strapping around the piping, the Mounting Bracket Kit may be the answer.

MOUNTING BRACKET KIT INCLUDES:
● 2 - 2 in. Eye Straps (aka Footman Loops) Made from chrome plated forged bronze wire. 3 13/16 in. long; 2 in. strap opening, 3 1/8 in. center-to-center screw location; 3/8 in. high.

● 4 - Phillips Flat Head Stainless Steel Machine Screws (1 -1/4" long; 10-24 thread).

The number of kits required depends on the number of straps on the StowMate® product, and the design of the target structure. It may be that installation can be accomplished through a combination of the standard mount method and Mounting Brackets.

StowMate® products that may require the Mounting Bracket Kit:

StowMate® products that may require the Mounting Bracket Kit:	Tools required for proper installation:
● Life Jacket Storage - 4 Jacket Bag ● Life Jacket Storage - 6 Jacket Bag ● Off-Shore Jacket Bag ● Leaning Post Front and Side Pockets ● Poling Platform Bag ● T-Top Side Pockets.	● Safety goggles ● Electric or cordless drill ● Tap Wrench ● #2 Tip Phillips Head Screwdriver ● 10-24 Tap/ Drill Combo Pack ● Cutting oil ● Thread locker – medium duty (e.g., Loctite®)

9.5 inch Relocation Velcro® Adhesive Hook

This Nylon Velcro® Hook is used for relocating StiknStow™ products to a new or secondary location. The package contains 2 strips of Industrial Strength Pressure Sensitive Adhesive Velcro®. Installation instructions on back of package.

SIZE: 9.5 IN. TALL X 2 IN. WIDE.

Available in White only

5.5 inch Relocation Velcro® Adhesive Hook

This Nylon Velcro® Hook is used for relocating StiknStow™ products to a new or secondary location. The package contains 2 strips of Industrial Strength Pressure Sensitive Adhesive Velcro®. Installation instructions on back of package.

SIZE: 5.5 IN. TALL X 2 IN. WIDE.

Available in White only

BevMate I - Bottle Holder

ONE OF OUR BEST SELLERS!

The BevMate I is a mesh bottle holder that attaches to any vertical tubular structure on a boat like T-Top frames, grab rails or rod holders.

Two black one-wrap Velcro® straps are used for strong support with an optional adhesive square patch on the strap inside for added stability. Folds flat for easy storage.

SIZE: 5.5 IN. TALL X 3 IN. DIAMETER.

U.S. Patent # 531,858S

BevMate II - Bottle & Cell Phone Holder

The BevMate II is a combination mesh bottle and cell phone holder that attaches to any vertical tubular structure on a boat like a T-Top frame, grab rail or rod holders. Side pocket attached to the bottle holder by clear vinyl and will hold standard size cell phones or other small items.

Two black one-wrap Velcro® straps are used for strong support with an optional adhesive square patch on the strap inside for added stability. Folds flat for easy storage.

SIZE: 5.5 IN. TALL X 3 IN. DIAMETER.

U.S. Patent # 531,858S

BevMate III - Can Holder

The BevMate III is a mesh can holder that attaches to any vertical tubular structure on a boat like a T-Top frame, grab rail or rod holder. It easily holds any 12-ounce can.

Two black one-wrap Velcro® straps are used for strong support with an optional adhesive square patch on the strap inside for added stability. Folds flat for easy storage.

SIZE: 4.5 IN. TALL X 3 IN. DIAMETER.

U.S. Patent # 531,858S

BevMate IV - Jumbo Can Holder

The BevMate IV is a mesh can holder that attaches to any vertical tubular structure on a boat like a T-Top frame, grab rail or rod holder. It holds any 12-ounce can with large foam coozy.

Two black one-wrap Velcro® straps are used for strong support with an optional adhesive square patch on the strap inside for added stability. Folds flat for easy storage.

SIZE: 4.5 IN. TALL X 3.5 IN. DIAMETER.

U.S. Patent # 531,858S

BevMate V - Tumbler Holder

The BevMate™ V is a mesh tumbler holder that attaches to any vertical tubular structure on a boat like T-Top and Tower frames, grab rails or rod holders. This version will also accommodate many of the large thermal coffee mugs!

Two black one-wrap Velcro® straps are used for strong support with an optional adhesive square patch on the strap inside for added stability. Folds flat for easy storage.

SIZE: 6 IN. TALL X 4 IN. DIAMETER.

U.S. Patent # 531,858S

Double Leader

An angler's friend, the Double Leader has two side-by-side compartments with flaps that are secured with Velcro® closures. It holds up to 6 narrow style reels of leader line at a time and has a sturdy side utility tool holster for easy access.

It attaches to any flat surface on a boat by three vertical strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 6 IN. TALL X 12 IN. LONG X 2.5 IN. DEEP.

HoldaGrip

Designed by and for the avid angler, the HoldaGrip is great for Boga Grip® or similar 25 to 30 pound fish scale holder. HoldaGrip is a perfect solution for favorite catch and release accessory.

Attaches to any vertical tubular structure. Two one-wrap hook and loop straps are used for strong support with an optional adhesive square patch on the strap inside for added stability.

SIZE: 9.5 IN. TALL X 3.75 IN. DIAMETER.

Rod & Tackle Tote

The Rod & Tackle Tote is perfect for easily organizing and transporting up to 4 rods and reels. Plus the center compartment is designed to hold fishing tackle boxes, either one 3 inch, or two 1.5 inch boxes (not included). One four inch flap fastens over the pocket with a Velcro® closure for a secure fit. Easy to wash and store for later usage.

SIZE: 9.25 IN. TALL X 14.5 IN. WIDE X 4 IN. DEEP.

Available in Royal Blue only.

Patent Pending

Junior Long

The Junior Long is simply the left pocket of the Long Pocket. It works well in tight spots for items such as sunscreen, lotion, and eyeglass cases; etc. Velcro® closures are used to secure pocket flaps.

The pocket attaches to any flat surface on a boat with three strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 5 IN. TALL X 10 IN. LONG X 1.5 IN. DEEP.

Long

The Long is made up of two pockets. One long pocket for large items such as sunscreen, lotion, and eyeglass cases; and one pocket for smaller items. Velcro® closures are used to secure pocket flaps.

The pocket attaches to any flat surface on a boat with four strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 5 IN. TALL X 16 IN. LONG X 1.5 IN. DEEP.

Pole Pocket

The pole pocket is created with clear vinyl on the front with mesh backing. The perfect size to hold handheld GPS units and cell phones including oversized cell phones.

It attaches to any vertical tubular structure on a boat like a T-Top frame, grab rail or rod holder by two black one-wrap Velcro® straps with an optional adhesive square patch on the strap inside for added stability. Black acrylic binding only.

SIZE: 6 IN. TALL X 4.75 IN. WIDE.

Wall Pocket

The wall pocket is created with clear vinyl on the front, mesh backing and black acrylic binding. The perfect size to hold handheld GPS units, portable MP3 players and cell phones including oversized cell phones.

It attaches to any flat surface on a boat by one strip of waterproof industrial strength adhesive Velcro®.

SIZE: 6 IN. TALL X 4.75 IN. WIDE.

Mini

The Mini is a small single pocket that can hold 2 to 3 6 narrow style reels of leader line of leader line. It also works great in small places and for small items, like keys or a cell phone.

It attaches to any flat surface on a boat with two strips of waterproof industrial strength adhesive Velcro®. A Velcro® closure is used to secure pocket flap. Black acrylic binding only.

SIZE: 6 IN. TALL X 6 IN. LONG X 2.5 IN. DEEP.

Seat Back Small

The Seat Back Small is a flat mesh storage pocket with two compartments. Turn your seat back into convenient and handy storage for items you use the most and need quickly.

It attaches with polypropylene straps that utilize nylon D-Ring hardware for a secure grip. Picture shows installation on a leaning post seat back. Black acrylic binding and straps only.

SIZE: 6 IN. TALL X 18 IN. LONG.

Seat Back Medium

The Seat Back Medium is a flat mesh storage pocket with three compartments. Turn your seat back into convenient and handy storage for items you use the most and need quickly.

It attaches with polypropylene straps that utilize nylon D-Ring hardware for a secure grip. Picture shows installation on a leaning post seat back. Black acrylic binding and straps only.

SIZE: 8 IN. TALL X 24 IN. LONG.

Seat Back Large

The Seat Back Large is a flat mesh storage pocket with three compartments. Turn your seat back into convenient and handy storage for items you use the most and need quickly.

It attaches to the back (or front) of linear seat backs with polypropylene straps that utilize nylon D-Ring hardware for a secure grip. Picture shows installation on a flip-flop cooler seat back. Black acrylic binding and straps only.

SIZE: 9.5 IN. TALL X 32 IN. LONG.

Square

To help round-up that clutter, you'll like our 3-pocket square with flaps. It holds ALL those small personal items and the pocket flaps use Velcro® closures to keep everything secure.

It attaches to any flat surface on a boat by three vertical strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 10 IN. TALL X 10 IN. WIDE X 1.5 IN. DEEP.

Stack

What a great idea! Two of our Mini's in a stack. It holds twice as much. You can attach it inside your hatch door for out of the way storage needs.

Velcro® closures are utilized to secure each pocket flap. It attaches to any flat surface on a boat using two vertical strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 12 IN. TALL X 6 IN. WIDE X 1.5 IN. DEEP.

Trash Tote - Small Pole Mount

The Trash Tote is an environmentally friendly solution to collecting and removing trash from your boat. This SMALL size holds more than two gallons. It utilizes a Velcro® closure at the top and is easily washed and stored for later usage.

The POLE Mount attaches to any vertical tubular structure like T-Top frames or grab rails by two black Velcro® one-wrap straps for a more secure attachment. Black handle straps only.

SIZE: 12 IN. TALL X 8.5 IN. WIDE X 6.5 IN. DEEP.

U.S. Patent # 544,166S

Trash Tote - Small Wall Mount

The Trash Tote is an environmentally friendly solution to collecting and removing trash from your boat. This SMALL size holds more than two gallons. It utilizes a Velcro® closure at the top and is easily washed and stored for later usage.

The WALL Mount attaches to any flat surface on a boat by two sturdy waterproof industrial strength adhesive Velcro® strips.

SIZE: 12 IN. TALL X 8.5 IN. WIDE X 6.5 IN. DEEP.

U.S. Patent # 544,166S

Trash Tote - Large Pole Mount

The Trash Tote is an environmentally friendly solution to collecting and removing trash from your boat. This LARGE size holds more than three gallons. It utilizes a Velcro® closure at the top and is easily washed and stored for later usage.

The POLE Mount attaches to any vertical tubular structure like T-Top frames or grab rails by two black Velcro® one-wrap straps for a more secure attachment. Black handle straps only.

Shown in NAVY.

SIZE: 18 IN. TALL X 8.5 IN. WIDE X 6.5 IN. DEEP.

U.S. Patent # 544,166S

Trash Tote - Large Wall Mount

The Trash Tote is an environmentally friendly solution to collecting and removing trash from your boat. This LARGE size holds more than three gallons. It utilizes a Velcro® closure at the top and is easily washed and stored for later usage.

The WALL Mount attaches to any flat surface on a boat by two sturdy waterproof industrial strength adhesive Velcro® strips. Black handle straps only.

SIZE: 18 IN. TALL X 8.5 IN. WIDE X 6.5 IN. DEEP.

U.S. Patent # 544,166S

Trash Tote - XL Pole Mount

The Trash Tote is an environmentally friendly solution to collecting and removing trash from your boat. The Large (7-gallon) Pole Mount attaches to any vertical tubular structure like T-Top frames or grab rails by two one-wrap straps for a more secure attachment. Velcro® closure. Wash and store for later usage.

Size: 22 IN. x 12 IN. x 5.25 IN.

U.S. Patent # 544,166S

Trash Tote - XL Wall Mount

The Trash Tote is an environmentally friendly solution to collecting and removing trash from your boat. The Large (7-gallon) Wall Mount attaches to any flat surface on a boat by two sturdy waterproof industrial strength adhesive Velcro® strips. Velcro® closure. Wash and store for later usage.

Size: 22 IN. x 12 IN. x 5.25 IN.

U.S. Patent # 544,166S

Utility Box - Small

The SMALL Utility Box is a single mesh compartment primarily designed to hold fishing tackle boxes (specifically the Plano 3600 series). One four-inch flap fastens over the center of the pocket with a Velcro® closure for a secure fit.

It attaches to any flat surface on a boat by two strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 10.5 IN. TALL X 12 IN. WIDE X 2.25 IN. DEEP.

Utility Box - Large

The LARGE Utility Box is a single mesh compartment primarily designed to hold fishing tackle boxes (specifically the Plano 3700 series). One four-inch flap fastens over the center of the pocket with a Velcro® closure for a secure fit.

It attaches to any flat surface on a boat by three strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 9.5 IN. TALL X 15.5 IN. WIDE X 2.25 IN. DEEP.

Utility Box Plus 2

The PLUS 2 Utility Box is created by combining two large mesh compartments anchoring each end, with a single mesh compartment in the middle. One four-inch flap fastens over each of the two end pockets with a Velcro® closure for a secure fit.

It attaches to any flat surface on a boat by six strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

Picture shows installation on the rear seat front of a G3 Jonboat®.

SIZE: 9.5 IN. TALL X 41 IN. WIDE X 2.25 IN. DEEP.

Utility Box X-Deep

The X-DEEP Utility Box is similar to the Large Utility Box with one large oversized mesh compartment with two-inches of depth added to the pocket. One four-inch flap fastens over the pocket with a Velcro® closure for a secure fit.

It attaches to any flat surface on a boat by three strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 9.5 IN. TALL X 15.5 IN. WIDE X 4.5 IN. DEEP.

Utility Pocket 10

This is ONE big pocket with a flap that keeps your whatnots safe in one place and they won't fall out. A perfect square, single pocket that utilizes Velcro® to secure the closure flap.

It attaches to any flat surface on a boat with two vertical strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 10 IN. TALL X 10 IN. WIDE X 2.5 IN. DEEP.

Utility Pocket 20

This can almost hold it all. Small tackle boxes, first-aid kit, flashlight, rope, keys, wallet, spare leader, just about anything you want and the flaps prevent spillage in rough water. This pocket has two ten-inch compartments. Each flap utilizes a Velcro® closure to secure gear.

It attaches to any flat surface on your boat with three vertical strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 10 IN. TALL X 20 IN. WIDE X 2.5 IN. DEEP.

Utility Pocket 30

This is the big one! 3 pockets in a row, 2 with flaps and the middle one is open for quick access. What could be better? This pocket has three ten-inch side-by-side compartments. The end pockets have flaps with Velcro® closures to secure your gear.

It attaches to any flat surface on a boat with four vertical strips of waterproof industrial strength adhesive Velcro®. Black acrylic binding only.

SIZE: 10 IN. TALL X 30 IN. WIDE X 2.5 IN. DEEP.

Life Jacket Bag 4

This mesh life jacket bag accommodates FOUR Class/Type II life jackets or ONE throw ring and TWO Class/Type II life jackets.

It has three durable straps with D-Ring and Keeper hardware that span up to five feet for a secure grip onto a T-Top frame. One large flap overlaps the front end of the bag with a Velcro® strip on the underside for a secure closure.

Black acrylic binding and straps only.

Can't strap the bag to the T-Top frame? Problem solved! Check out our recently introduced Mounting Bracket Kit. Bracket kits are located in the All Products catalog page.

SIZE: 20.5 IN. LONG X 25 IN. WIDE X 5 IN. DEEP.

Life Jacket Bag 6

This mesh life jacket bag accommodates SIX Class/Type II life jackets or ONE throw ring and FOUR Class/Type II life jackets.You benefit with a safer boat and more storage.

It has three durable straps with nylon D-Ring and Keeper hardware that span up to five feet for a secure grip onto a T-Top frame. One large flap overlaps the front end of the bag with a Velcro® strip on the underside for a secure closure.

Black acrylic binding and straps only.

Can't strap the bag to the T-Top frame? Problem solved! Check out our recently introduced Mounting Bracket Kit. Bracket kits are located in the All Products catalog page.

SIZE: 20.5 IN. LONG X 25 IN. WIDE X 7.5 IN. DEEP.

Off-Shore Jacket Bag

This oversized mesh life jacket bag easily stores up to FOUR Class/Type 1 life jackets. Keeps your boat neat, safe, and organized!!

It has durable straps with nylon D-Ring and Keeper hardware that span up to five feet for sturdiness and support. One large flap overlaps the front end of the bag with a Velcro® strip on the underside for a secure closure.

Black acrylic binding and straps only.

Shown in BLACK.

Can't strap the bag to the T-Top frame? Problem solved! Check out our recently introduced Mounting Bracket Kit. Bracket kits are located in the All Products catalog page.

SIZE: 32 IN. LONG X 23 IN. WIDE X 9 IN. DEEP.

Poling Platform Bag

The Poling Platform Bag can easily hold ONE throw ring or cushion.

Two polypropylene straps with nylon D-Ring and Keeper hardware will span up to three and a half feet for sturdiness and support. A large flap overlaps the front end of the bag with a Velcro® strip on the underside for a secure closure.

Black acrylic binding and straps only.

Shown in NAVY.

Can't strap the bag to the framework? Problem solved! Check out our recently introduced Mounting Bracket Kit. Bracket kits are located in the All Products catalog page.

Need a unique or larger bag? Email us your specific requirements and measurements to info@stowmate.com and we'll help make your idea a reality!

STANDARD SIZE: 17 IN. LONG X 17.75 IN. WIDE X 3 IN. DEEP.